 |
Vertex's
New AirStation - AirStation
XL |
 |
 |
Lake
and pond aerator: Air1XL™ |
|
|

|
The
Air 1XL™ aeration system circulates
up to 8,190 GPM!
• Increased
dissolved oxygen
• Stops oxygen related fish kills by raising entire water
column oxygen levels
• Reduces nutrient levels and associated algae growth
• Ends thermal stratification
• Improves fisheries by expanding oxygenated habitat
• Reduces aquatic midge and mosquito insect hatches
• Eliminates foul odors from undesirable dissolved
gases
• SAFE - no electricity in the water and
full GFI protection on all circuits
The
Vertex Air 1XL™ is a
super-efficient, affordable
and safe system for circulating
up to 8,190 GPM. In a typical
pond with 8 foot depths, an
Air 1XL™ can aerate approximately
2 acres depending on dissolved
oxygen demand and other factors.
A 1/3 hp piston compressor,
housed in our rustproof outdoor
cabinet, feeds a bottom mounted
AirStationXL™ Diffuser
utilizing Vertex’s MicronBubble™ technology.
The majority of bubbles are
only 500 to 1000 microns in
diameter. As bubble size decreases,
oxygen transfer rates increase
dramatically. The rising force
of millions of bubbles circulates
the entire water column, entraining
bottom water up to the surface
allowing vital oxygen to be
absorbed. Oxygen levels are
increased and kept constant
throughout the entire lake,
preventing drastic O2 swings
that can lead to fish-kills.
With no electricity in the
water, Vertex’s aeration
systems are safe for any type
of water recreation. Our self-cleaning
AirStationXL™ Diffuser
allows for years of high performance,
reliability, low maintenance
and are covered under our five-year
warranty.
|
|
|
|
|
|
FEATURES |
|
|
|
• U.L.
Listed
• 1/3 hp for exceptionally low monthly electrical costs
• Thermal overload protection
• 5.4 running amps @ 115 volt operation, 1 phase
• One year warranty
• Compressor produces 2.5 CFM @ 20PSI
Piston type built for continuous operation and equipped with
thermal overload protection. Unit shall be oil-free and require no
scheduled maintenance other than periodic cleaning of included air
filter.
|
|
|
|
|
FEATURES |
|
|
|
• Class "A" GFCI
protection on all circuits
• Powder coated for durable, attractive finish
• Heavy duty cooling fan rated at 115 CFM
• Rustproof aluminum construction
• Easy plug-in connection to waterside electrical service
• Equipped with barrel lock for increased security
Enclosure shall be constructed of aluminum with gray electrostatically-bonded
powder coating to provide lifetime warranty against rust. Enclosure shall
be equipped with stamped ventilation or grill to provide forced air circulation
and an integral cooling fan with thermal protection, producing 115 CFM
to guard against excessive compressor operating temperatures. ENCLOSURE
COMES EQUIPPED WITH CLASS A GFCI PROTECTION ON BOTH THE COMPRESSOR AND
FAN CIRCUITS. |
| |
|
|
|
|
FEATURES |
|
|
• Four
9" flexible membrane discs with Vertex
MicronBubble™ technology
• Self-cleaning, low maintenance
• Rugged EPDM construction
• One Vacuum formed and sonic welded HDPE base unit
• Hollow design for sand ballast
• Lipped edge prevents sinking into soft bottom sediments
• FIVE-YEAR WARRANTY! |
Each
AirStationXL™(1) shall consist of
four self-cleaning, 9" diameter, flexible
membrane diffusers of EPDM compound with
100% rebound memory, each producing millions
of fine 500 to 3000 micron bubbles – the
majority 500 to 1000 microns. Each diffuser
station shall be equipped with vacuum-formed
HDPE base, sonic spot-welded to provide
unit integrity. Base unit (17.25"L x 13.25"W
x 3.35"D) shall be of hollow chamber design
for the addition of inert pea gravel ballast
and have lipped design to prevent settling
into soft bottom sediments.
|
|
| BottomLine™ Supply
Tubing |
|
|
|
FEATURES |
|
|
|
• Self-weighted
for easy installation
• Heavy duty wall thickness (0.24") for durability
• Available in 100 feet increments
• Remains flexible in cold temperatures
Self-weighted,
direct burial submersible tubing for
connection from compressor to diffuser
stations. Tubing shall be of flexible
PVC composite construction for use with
standard PVC solvent weld cement and
0.5" insert fittings. Tubing shall have
0.55" I.D. and 0.24" wall thickness for
long term durability and protection against
punctures. Remains flexible in cold temperatures.
|
|
|
|
|
|
|
| Install
all electrical equipment in accordance
with Article 680 of the National
Electrical Code and all local codes.
Vertex Water Features reserves
the right to improve and change
our designs and/or specifications
of our aerators without notice
or obligation. © 2004 Vertex Water
Features |

Click
on the DOWNLOAD PDF NOW button
for a complete PDF document for this
aerator.
If you do not already have Adobe Acrobat, you can download a free
copy
of Adobe's Acrobat Reader by clicking on the yellow button below.
|
Virginia
Lake Management Company &
Aerators Aquatics 4 Lakes N Ponds.Com
Phone (757)591-8780 |Toll Free (866)697-2584
Fax (757)873-4896
2844 Crusader Circle, Suite 450, Virginia Beach,
VA 23453,
11861 Canon Blvd, Suite E, Newport News, VA 23606
and 16 Commerce Pkwy, Unit 105, Fredericksburg, VA
22406
|