|
 |
The
Air 1 Plus™ pond aeration
system benefits include:
• Independently
tested pumping rate,
up to 7,700 GPM
• Increased oxygen levels throughout water column
• Elimination of low oxygen fish kills
• Reduced nutrient levels and associated algae growth
• Oxidized/reduced organic bottom muck
• Improved fisheries by expanding oxygenated habitat
• Reduced aquatic midge and mosquito insect hatches
• Elimination of foul odors from undesirable dissolved gases
• Safe entry - no electricity in the water, GFI protection
on all circuits
• Extended warranties on all system components
The
Vertex Air 1 Plus™ is
an inexpensive solution
for small, 1-2 acre
ponds with irregular
shapes and depths
that impede normal
diffuser circulation.
The Air 1 Plus has
the same powerful
compressor system
and cabinet as our
standard Air 1 system
but includes a valve
manifold and second
CoActive AirStation
for extra circulation.
This additional AirStation
can be placed in
cove areas, finger
canals, behind shallow
sandbars or anywhere
in the water body
where the pond’s
shape or bottom contour
will limit oxygen
flow from a single
diffuser. The Air
1 Plus utilizes Vertex's
MicronBubble™ technology
allowing vital oxygen
to be absorbed and
poisonous gasses
expelled. With no
electricity in the
water, Vertex's aeration
systems are safe
for any type of water
recreation. Our systems
have an industry
leading two-year
warranty plus a five-year
warranty against
rust and corrosion
on the cabinet, five-year
warranty on the AirStations™ and
a 15-year warranty
on BottomLine™ supply
tubing. |
|
|
|
FEATURES |
|
|
• U.L.
Listed
• 1/3 hp for exceptionally low monthly electrical costs
• Thermal overload protection
• 5.4 running amps @ 115 volt operation, 1 phase
• One year warranty
•Compressor produces 2.5 CFM @ 20PSI
Piston type built for continuous operation and equipped with thermal
overload protection. Unit shall be oil-free and require no scheduled
maintenance other than periodic cleaning of included air filter.
|
|
|
FEATURES |
|
|
• Class "A" GFCI
protection on all circuits
• Powder coated for durable, attractive finish
• Heavy duty cooling fan rated at 105 CFM
• Rustproof aluminum construction
• Easy plug-in connection to waterside electrical service
• Equipped with barrel lock for increased security
Enclosure shall be constructed of aluminum with gray electrostatically-bonded
powder coating to provide lifetime warranty against rust. Enclosure shall
be equipped with stamped ventilation grill to provide forced air circulation
and an integral cooling fan with thermal protection, producing 105 CFM
to guard against excessive compressor operating temperatures. ENCLOSURE
COMES EQUIPPED WITH CLASS A GFCI PROTECTION ON BOTH THE COMPRESSOR AND
FAN CIRCUITS. |
|
CoActive
AirStation™ Assembly
|
|
|
FEATURES |
|
• Two
9" flexible membrane discs
with Vertex MicronBubble™ technology
• Self-cleaning, low maintenance
• Rugged EPDM construction
• One Vacuum formed and sonic welded HDPE base unit
• Hollow design for sand ballast
• Lipped edge prevents sinking into soft bottom sediments
• FIVE-YEAR WARRANTY! |
Each
AirStation™(1) shall consist
of two self-cleaning, 9" diameter,
flexible membrane diffusers of
EPDM compound with 100% rebound
memory, each producing millions
of fine 500 to 3000 micron bubbles – the
majority 500 to 1000 microns.
Each diffuser station shall be
equipped with vacuum-formed HDPE
base, sonic spot-welded to provide
unit integrity. Base unit (17.25"L
x 13.25"W x 3.35"D) shall be
of hollow chamber design for
the addition of inert pea gravel
ballast and have lipped design
to prevent settling into soft
bottom sediments. AIRSTATION™ shall
be designed with adjustable diffuser
riser to accommodate any site
requirements. |
|
BottomLine™ Supply
Tubing
|
|
|
FEATURES |
|
|
• Self-weighted
for easy installation
• Heavy duty wall thickness (0.24") for durability
• Available in 100 feet increments
• Remains flexible in cold temperatures
Self-weighted,
direct burial submersible tubing
for connection from compressor
to diffuser stations. Tubing
shall be of flexible PVC composite
construction for use with standard
PVC solvent weld cement and
0.5" insert fittings. Tubing
shall have 0.55" I.D. and 0.24" wall
thickness for long term durability
and protection against punctures.
Remains flexible in cold temperatures.
|
|
|
|
|
|
|
|
